Kick-eez Slip on recoil pads

Labradinger

Labradinger

Well-known member
Bought a citori over the winter. I need a new recoil pad as its over 30 years old and seems to have dried out. The gun fits me ok, maybe 1/4 inch long, so definitely going with a shorter recoil pad. Found a kick eez slip on recoil pad that has 1/4 inch inserts to shorten or lengthen lop depending on clothing. Do i need to get a solid butt plate to keep moisture ect out of the stock or will the slip on recoil pad be enough?

Also, does anyone use this pad?
 
Depending on finish type on the wood I would be cautious of leaving it on all the time. Over time the neoprene material can change the color of the finish slightly. Would expect on oil finish guns to be worse then others types of finish but just wanted to make you are. For looks alone I would just replace the recoil pad with the correct thickness and not use the slip over but that is just my opinion.
 
Agree with John - you may actually be able to purchase a replacement pad that fits your Citori
The other option is grind to fit - I do these and it
requires the proper tool (Miles Gilbert recoil pad fixture - or the like) & some practice
Pads come in various thicknesses so you can order a pad thinner than the existing one
Pachmayr & Kickeez make nice pads
The Pachmayr lightweight F250 is a nice looking pad to consider for your gun
If you’re anywhere close to northern Illinois I’d be happy to give you a hand with your project
Good luck!
 
i hunt from 70 degrees down to -20 so my thought here, while i know it doesnt look as good, is to be able to drop 1/2 to 3/4 lop from the gun when I have the bulky stuff on by simply taking a couple inserts out. Ive noticed several times over the years where I shoot fine early season but tend to snag clothing as im mounting the gun when im wearing heavy stuff.
 
Labradinger said:
i hunt from 70 degrees down to -20 so my thought here, while i know it doesnt look as good, is to be able to drop 1/2 to 3/4 lop from the gun when I have the bulky stuff on by simply taking a couple inserts out. Ive noticed several times over the years where I shoot fine early season but tend to snag clothing as im mounting the gun when im wearing heavy stuff.
Click to expand...
If what your are proposing really worked everyone would be doing it and I don't know of anyone that has. Just get a new recoil pad and have a competent gunsmith fit it to your gun with your proper length of pull. Forget about trying to adjust the LOP depending on the amount of clothing you are wearing.
 
Labradinger said:
i hunt from 70 degrees down to -20 so my thought here, while i know it doesnt look as good, is to be able to drop 1/2 to 3/4 lop from the gun when I have the bulky stuff on by simply taking a couple inserts out. Ive noticed several times over the years where I shoot fine early season but tend to snag clothing as im mounting the gun when im wearing heavy stuff
Click to expand...

As far as "fine tuning" your shotgun, just remember, you are shooting a shotgun, not threading a needle. Maybe if you shoot competitively...for money....
 
remy3424 said:
As far as "fine tuning" your shotgun, just remember, you are shooting a shotgun, not threading a needle. Maybe if you shoot competitively...for money....
Click to expand...
I disagree. 1/4 inch too long is a major fit problem. If it is truly a 1/4 inch long. That is why shims are so thin. Having a gun that fits that poorly will lead to misses and crippled birds.
 
But not as much as your shot placement/aiming...shooting over/under, in-front/behind. You have a large pattern that covers-up many shooting/fitment flaws.
 
remy3424 said:
But not as much as your shot placement/aiming...shooting over/under, in-front/behind. You have a large pattern that covers-up many shooting/fitment flaws.
Click to expand...
Your aiming and shot placement are both dependent on fit. Just like your draw length shooting a bow. Most people shoot a draw length that is a 1/2 inch too long. Shooting arrows in the yard, it may not show up much. But when you put on broad heads, it magnifies. Same with a shotgun. With a proper fitting gun, you will put a larger percentage of birds in the bag.
 
syrenusa.com

Why It Matters: Gun Fit and the Upland Hunting Experience - Syren USA

If you hunt for upland birds, you know. Having a gun that fits enhances your ability to bag more birds. Gun fit matters.
syrenusa.com syrenusa.com

www.huntershandbook.com

HOW TO STAY ON TARGET WITH PROPER GUN FIT — Hunters Handbook

By Brad Fitzpatrick There are a lot of choices that must be made when purchasing a new rifle or shotgun. Gauge or caliber is an important consideration, and action type is another critical choice. But very few hunters ever spend time finding a gun that fits them, and that might be a mistake. Impro
www.huntershandbook.com www.huntershandbook.com

www.ducks.org

Make Sure Your Shotgun Fits | Ducks Unlimited

Ensure your shotgun fits you properly for better shooting performance. Learn the importance of a well-fitted shotgun and discover tips to adjust and customize your shotgun for optimal results.
www.ducks.org www.ducks.org

www.newhuntersguide.com

How To Fit A Shotgun To You - Length of Pull, Comb Height, & Cast - New Hunters Guide

Does your shotgun fit you? How do you fit a shotgun to your body? The answer to these two questions can determine whether or not you will be able to shoot well or be plagued...
www.newhuntersguide.com www.newhuntersguide.com
 
I've found it helps to change recoil pads, depending on the season. I have a disability - right arm doesn't work very well, hence the difficulty in mounting the gun. Additional clothing in the winter does impact the ease of mounting. Changing the recoil pad, with the seasons, has helped me; doesn't look too professional...but it works.

Also, I've found that over the stock pad is an easier change vs screwing/unscrewing different pads - you can wear out the screw holes...
 
You must log in or register to reply here.
Back
Top