Goosemaster
Well-known member
Not sure, but I do always use high brass for pheasant.For sake of discussion Goose, do you agree that the standard 2 3/4” 20 gauge load of 1 oz of number 5 or 6 shot at 1200-1350 FPS is a good pheasant round?
Not sure, but I do always use high brass for pheasant.For sake of discussion Goose, do you agree that the standard 2 3/4” 20 gauge load of 1 oz of number 5 or 6 shot at 1200-1350 FPS is a good pheasant round?
Like that article said, Scattergun Lodge is pen-raised birds. Of course a 28 could do ok on those. Like all writers, Spomer will use whatever gun/ammo/boots/vest/pants/shirt/gloves/after shave that the magazine or host tells them to use. Pen birds in October are light-years away from wild birds in Dec.
Yeah, but who puts in the front every single time. I love my 28. I spent several years hunting quail with it. As far as the runners go, I'll take my chances with 1 1/4 of 5's. By the way, I wouldn't hunt anything bigger than a dove with 7/8's. And I don't think there's any difference between an oz of shot from a 28 or a 20. Therefor the only reason to shoot a 28 is because of the novelty. Unless you re-load, who in the hell is going to pay 25-35 bucks a box when you can get a good box and maybe better box for 12.00. As far as weight goes, my 686 ultralight is under 6lbs. My uggy 20 is a hair over 5.5 lbs. So the only advantage I can see is that they are a little trimmer. Would I ever hunt pheasants with one? Sure, if I was getting good shots at several cocks a day. Even then, just to say I did. Rant is for conversation only!Put 7/8 to an ounce of shot on the front end of a pheasant at reasonable ranges it really don’t matter the gauge ,
Make a bad shot and hit him to far back and you don’t break legs , you got a runner don’t matter the gauge .
It is important to use right choke / load to make sure you are throwing a good pattern .
I agree with the who puts it in the head every single time. Have to recognize that there will be some body shots and some marginal shots.Yeah, but who puts in the front every single time. I love my 28. I spent several years hunting quail with it. As far as the runners go, I'll take my chances with 1 1/4 of 5's. By the way, I wouldn't hunt anything bigger than a dove with 7/8's. And I don't think there's any difference between an oz of shot from a 28 or a 20. Therefor the only reason to shoot a 28 is because of the novelty. Unless you re-load, who in the hell is going to pay 25-35 bucks a box when you can get a good box and maybe better box for 12.00. As far as weight goes, my 686 ultralight is under 6lbs. My uggy 20 is a hair over 5.5 lbs. So the only advantage I can see is that they are a little trimmer. Would I ever hunt pheasants with one? Sure, if I was getting good shots at several cocks a day. Even then, just to say I did. Rant is for conversation only!![]()

That's a lot better than it was a few months ago but I'm still trying to stock up on 16 gauge. I don't shoot them either.These arguments are much like the dog arguments. Those who favor taking their cock-a-poo afield and cast scorn on the guy hunting with his Pekingese and vice-versa. It's all good; hunt with breed and the gauge you like the most. Don't worry about what the other guy hunts with.
That said, just to pass the time (and maybe stir the pot a bit to get something else to read) :
I agree that, given the appropriate shells, an ounce of 5s is what it is ballistically, whether fired from a 20 or a 28 or even a 12. I do smile however when people bring up the cost of the 28's ammunition.
"Therefor the only reason to shoot a 28 is because of the novelty"
Or perhaps it's because a person has found a 28ga that fits, is well balanced and that that person shoots well, swings easily, is an absolute delight to carry and which the owner finds aesthetically pleasing. Perhaps?
"who in the hell is going to pay 25-35 bucks a box when you can get a good box and maybe better box for 12.00."
I do reload 28 for skeet and trap because I shoot a lot of clay. My reloads right now cost about $7.50 a box. I buy components when on sale and in large quantity. I do not reload for pheasant primarily because 5 shot bridges in my MEC drop tube and is therefore a PITA. Otherwise, I probably would.
Our sport is not cheap. I go to SD in a 5-year-old pickup that cost a freckle under $60k. I carry shotguns that cost around $2k. I feed 3 labradors all year long, spend on various medications like heartworm too and who knows what all that actually costs but it's worth it for a lot of reasons. I pay what I consider an exorbitant fee to hunt 10 days in SD (I think it should be an annual license, not just 10 days) but I cheerfully pay up.
...And then there's the HUGE cost of my 28ga ammo. I shoot Winchester Super-X 1oz #5 @ 1205fps. I find them quite sufficient for pheasant. Last time I bought a flat on sale, they were about $16 per box. I still have half a flat left. In another thread someone called "BS" on that price so lets quell that in advance. This is currently advertised on Ammoseek.
https://www.recoilgunworks.com/super-x-28ga-2.75-high-brass-5-shot/?sku=X285
(Free shipping on $279+ / order 2 flats and you are set for years of hunting or share a flat with a fellow 28ga aficionado.)
View attachment 12432
I have shot the 28 Prairie Storms, also bought in the off season for a lower price than in season pricing. Tried a few boxes but I don't find them really anymore effective than the Winchesters given the way I hunt.
So, I wish you all a fine season, whatever gauge YOU choose as the best for you. I would never argue against your choice.
I think a lot of what these guys are saying about 28 gauge is bullshit. They are not great pheasant guns. You have to be very very close.Yeah, but who puts in the front every single time. I love my 28. I spent several years hunting quail with it. As far as the runners go, I'll take my chances with 1 1/4 of 5's. By the way, I wouldn't hunt anything bigger than a dove with 7/8's. And I don't think there's any difference between an oz of shot from a 28 or a 20. Therefor the only reason to shoot a 28 is because of the novelty. Unless you re-load, who in the hell is going to pay 25-35 bucks a box when you can get a good box and maybe better box for 12.00. As far as weight goes, my 686 ultralight is under 6lbs. My uggy 20 is a hair over 5.5 lbs. So the only advantage I can see is that they are a little trimmer. Would I ever hunt pheasants with one? Sure, if I was getting good shots at several cocks a day. Even then, just to say I did. Rant is for conversation only!![]()
Chestle, I use an Hornady APEX progressive for high-volume clays loads, but use a MEC Sizemaster for hunting loads. You should try the nickle-plated 5's from Precision Reloading in Mitchell. Those plated 5's don't bridge but go thru the MEC just fine. I use those plated 5's in a light 1 1/4 oz. 12 ga load around 1225 velocity in a 6 1/2 lb Citori Game Lite, and they work.
Well, I guess it's time to leave the forum. As in many forums, it seems that some male ego's are easily crushed. We all have opinions, and are sometimes asked by the newby's for help. But, in doing do, we can run afoul of those who disagree.
Good luck, and good hunting!