Hinge points and Choke Tubes lubed with M-Pro 7 Grease. Lube is M-Pro 7 Gun Oil LPX.
I use Howard's Feed n' Wax on the wood.
For cleaning the Bores and Choke Tubes, I use Ed's Red, which I mix.
It is very effective for removing caked residue and Plastic.
Ed's Red Bore Cleaner
by C.E. "Ed" Harris
1 part Dexron II, IIe or III ATF, GM Spec. D-20265 or later.
1 part Kerosene - deodorized, K1
1 part Aliphatic Mineral Spirits, Fed. Spec. TT-T-2981F, CAS
#64741-49-9, or may substitute "Stoddard Solvent", CAS #8052-41-3, or
equivalent, (aka "Varsol")
1 part Acetone, CAS #67-64-1.
I use Howard's Feed n' Wax on the wood.
For cleaning the Bores and Choke Tubes, I use Ed's Red, which I mix.
It is very effective for removing caked residue and Plastic.
Ed's Red Bore Cleaner
by C.E. "Ed" Harris
1 part Dexron II, IIe or III ATF, GM Spec. D-20265 or later.
1 part Kerosene - deodorized, K1
1 part Aliphatic Mineral Spirits, Fed. Spec. TT-T-2981F, CAS
#64741-49-9, or may substitute "Stoddard Solvent", CAS #8052-41-3, or
equivalent, (aka "Varsol")
1 part Acetone, CAS #67-64-1.
Last edited: