Search results

I don't know about the 20ga Heavy Hammer load but here's some of my data on the 12ga version! 12 GA 3” HEVI-Hammer Upland No. 3 Bismuth/Steel duplex load I acquired some HEVI-Hammer Upland 12-gauge 1 3/8-ounce No. 3 Bismuth/Steel duplex loads from a hunter. I then cut open five shells from the...

Here's some patterning I did on lead pheasant loads that may shed some light on this topic. Are you really getting any benefits from the more expensive “Premium” or “Super” pheasant loads on the market? Well, let’s see what the pattern board can tell us about some of these loads and how they...

Thanks for the kind words! I was just poking at you :ROFLMAO:

"The average pellet diameters were determined from measuring 25 random pellets (five from each shell dissected) with a micrometer." When I count pellets, I separate them into groups, so I make an accurate count and then just randomly pick a pellet from each 20 or so. I'm not looking to find...

12 GA 3" Boss Unmuzzled Bismuth No. 5 load I acquired some Boss 12-gauge 3-inch 1 3/8-ounce No. 5 bismuth loads from a hunter. I then cut open five shells, from the same box as the shells to be patterned, and the components (powder and shot) were weighed, counted, and measured for consistency...

https://forum.ultimatepheasanthunting.com/threads/boss-vs-kent-vs-hevi-bismuth-loads.26043/

12 GA 2 3/4” Kent Upland Bismuth No. 5 load I purchased a box of the Kent Bismuth Upland 12-gauge 2 ¾-inch 1 ¼-ounces No. 5 bismuth load (25 round/box @ $50.99/box + $4.23 tax = $55.22) at a local sporting goods store. I then cut open five shells, from the same box as the shells to be patterned...

For quail hunters that need or want to shoot steel loads, here are a few of my 20-gauge steel load pattern numbers to give you an idea of the kind of performance you might get from some commonly used choke constrictions. Pattern results from a 20-gauge Browning Citori with 28" Invector-plus...

Here are a few of my 20- and 12-gauge pattern numbers to give you an idea of how #3 and #2 steel pheasant loads perform, in my gun/chokes! I've only listed the chokes that could maintain a minimum of ~100 pellets in the 30" pattern at the distance tested. Patterning results from a 20-gauge...

Here are a few of my pattern numbers from 20- and 12-gauge lead loads, that I’ve shot pheasants with, to give you an idea of the kind of performance you might get from similar loads and chokes. Patterns from 20- and 12-gauge Browning Citoris with 28" Invector-plus barrels and Briley flush...

Here are a few of my 20-gauge pattern numbers from lead dove/quail loads to give you an idea of the kind of performance you might get from some commonly used choke constrictions. Pattern results from a 20-gauge Browning Citori with 28" Invector-plus barrels using Briley flush chokes (patterns...

Sporting Arms and Manufacturers Institute (SAAMI) has voluntary industry standards published in the American National Standards which include: 1) Pellet size variations allow for +/- one pellet size (+/- .010" dia.) of variation in “game” loads and +/- ½ pellet size (+/- .005" dia.) of...

Here are a few of my payload weights from factory shells. Average pellet counts and payload weights from 5 shells 12 GA 2 ¾" FEDERAL FIELD & TARGET LOAD 1 1/8 oz #7 ½ lead (486 pellets) @ 1200 fps PELLETS/SHELL (1 1/8 ounce = 492.2 gr) In-shell pellet count / weight (grains) Aver. 486.4 /...

Here are a few of my pattern numbers to give you an idea of the kind of performance you might get from these loads. Now you can be the judge! Patterning results from a 12-gauge 3-inch Remington 870 Special Purpose with a 28" barrel and factory flush Rem-chokes (pattern average of five, 30"...

Shooting some patterns with your gun/choke/load combo is the only way to really know how your combo performs. Pattern results from a 12-gauge 3" Remington 870 Special Purpose with a 28" barrel and factory flush Rem-chokes and Carlson extended chokes (pattern average of five, 30" post-shot...

Sometimes they go down a hole!

Nothing really wrong with BC but nothing special about it either. When using steel on pheasants, it is best to go with loads that contain #2 or #3 steel pellets. Steel shot lethality research conducted on pheasants by Tom Roster showed #2 steel to be more effective (at all ranges) than either...

And be ready with your phone camera. Yes, I occasionally miss a shot at a bird trying to get a photo, but it is worth it! Me and a buddy were blocking a tree row when I took these photos of Dixie digging my buddies crippled pheasant out of a hole. I was about to grab her hind legs and pull...

On action shots... Start taking them before you think it will be the right shot and keep hitting the button!